Skip to content
Iron Arc Fabrication
Fabricator · Central Victoria

Custom metalwork. Built to last.

Forged iron work, gates, arbours and firepits, designed and built by fabricator Darcy Ahern.

Scroll to open the gates
Years at the anvil
10+
Pieces made & installed
500+
Travels across Victoria
Based in Central VIC
Public liability
Fully insured

Made properly, by one maker.

  1. It starts at the gate.

    A gate is the first thing a visitor touches and the last thing they remember. It should look right and swing true for decades.

  2. Steel that ages well.

    Corten weathers to a deep, protective rust. Where a piece calls for it, iron is forged hot on the anvil, not bent cold from a catalogue.

  3. Drawn for your place.

    Measured on site, drawn up with you, made in the workshop and installed by the same hands that built it.

  4. Across Victoria.

    Based in Central Victoria. Homes, farms, wineries and distilleries across the state, large projects included.

Section ASome of the work we do

What we make.

A few examples of the work Darcy takes on, each measured, drawn, made and fitted by him. Don't see your job here? Ask. Start from one of these or bring your own idea.

  1. Pattern number 01.

    Gates & Fences

    Driveway gates, pedestrian gates and matching fence runs.

    Forged wrought-iron entrance gates with scroll cresting at a distillery estate
    Fig. 01 · Corten · Wrought iron · Mild steel

    Forged, corten or powder-coated, built to suit the property and hung to swing true for decades. Swing or sliding, manual or ready for automation.

    Materials
    Corten · Wrought iron · Mild steel
    Enquire about this: Gates & Fences
  2. Pattern number 02.

    Handrails & Balustrades

    Forged and stainless rails, made to measure.

    Forged steel handrail with a scroll terminal on stone steps
    Fig. 02 · Forged steel · Brushed stainless

    Handrails, balustrades and stair rails for exterior steps or interior stairs, from a single scroll-ended rail to a full landing balustrade.

    Materials
    Forged steel · Brushed stainless
    Enquire about this: Handrails & Balustrades
  3. Pattern number 03.

    Arbours & Pergolas

    Structures that frame a garden and stand for decades.

    Forged steel garden arbour with a scrollwork archway
    Fig. 03 · Corten · Forged steel

    Steel arbours, archways and pergolas, scrollwork or clean-lined, made to measure for the path, deck or courtyard they belong to.

    Materials
    Corten · Forged steel
    Enquire about this: Arbours & Pergolas
  4. Pattern number 04.

    Firepits & Fire Bowls

    Sculptural centrepieces that age beautifully outdoors.

    Faceted steel fire bowl overlooking Central Victorian hills
    Fig. 04 · Corten · Plate steel

    Hand-made steel firepits and fire bowls, faceted, geometric or round, built heavy enough to take years of weather and heat.

    Materials
    Corten · Plate steel
    Enquire about this: Firepits & Fire Bowls
  5. Pattern number 05.

    Outdoor Furniture

    Tables, chairs and benches in steel and reclaimed timber.

    Steel-frame outdoor table with a reclaimed timber top
    Fig. 05 · Powder-coated steel · Reclaimed timber

    Made-to-order settings built for the outdoors and finished for life, sized to the deck, pergola or garden they live in.

    Materials
    Powder-coated steel · Reclaimed timber
    Enquire about this: Outdoor Furniture
  6. Pattern number 06.

    Forged Ironwork

    Hand-forged scrolls, cresting and decorative detail.

    Close detail of a hand-forged steel scroll
    Fig. 06 · Forged iron

    Traditional forging meets modern design: scroll terminals, gate cresting, feature panels and hardware shaped hot on the anvil.

    Materials
    Forged iron
    Enquire about this: Forged Ironwork
  7. Pattern number 07.

    Screens & Feature Work

    One-off commissions, screens and statement pieces.

    Laser-cut steel privacy screen with native birds and gum trees
    Fig. 07 · Laser-cut steel · Corten

    Laser-cut privacy screens, pavilions and feature metalwork. If you can sketch it, Darcy can fabricate it.

    Materials
    Laser-cut steel · Corten
    Enquire about this: Screens & Feature Work
Section C

Process.

Four stages, from the first conversation to the last bolt. The same hands draw it, make it and fit it.

  1. Consult

    Tell Darcy what you need. He'll talk it through, visit the site if needed, and understand the vision. No obligation.

  2. Quote & drawings

    A detailed written quote, with drawings or sketches where the job needs them. Clear pricing, no hidden costs.

  3. Fabricate

    Made in the workshop to exact tolerances, forged and welded by hand, and checked at every stage before it leaves the floor.

  4. Install

    Fitted on site by the maker. The job isn't finished until it's exactly right and you're happy with it.

Begin with a consult

Written quote with drawings before any steel is cut.

Section DAbout

Darcy Ahern, fabricator.

Hand-forged scroll cresting on the distillery gates, made by Darcy Ahern

Hand-forged scroll cresting on the distillery gates, made by Darcy Ahern.

  • a. Forged scroll cresting
  • b. Corten post

Iron Arc Fabrication is Darcy Ahern's workshop: custom metalwork and forged iron work for homes, farms and venues across Victoria, from a workshop in Central Victoria.

It started with a simple belief: good metalwork should last a lifetime, look exceptional, and be made by someone who takes real pride in it. Every piece, from a driveway gate to a hand-forged firepit, gets the same attention. Measure twice, weld once, and the job isn't done until it's right.

Darcy works with homeowners, builders, architects and commercial clients. If it involves steel, he can build it.

ParticularsCentral Victoria
  • Fully insured · public liability
  • On-site installation
  • Detailed written quotes
  • Works from your drawings or his
Section E

Common questions.

  1. Yes. From a single garden gate for a homeowner to entrances, rails and feature work for builders, wineries and commercial venues.

  2. Always. You'll get a detailed, itemised written quote before any work begins, with drawings or sketches where the job needs them.

  3. Every job is different, so timelines vary. The average job takes 3–6 weeks, but larger or more complex projects can run longer. Give Darcy a call for a realistic timeframe for yours.

  4. Both. Darcy handles the on-site install so everything is fitted correctly. Fabrication-only can be arranged if you'd prefer to install yourself.

  5. Darcy is based in Central Victoria and travels across Victoria, including for larger projects. Get in touch and ask.

  6. The two main options are a natural rust finish and Corten's protective patina. Powder coating, hot-dip galvanising or brushed stainless can be arranged for some jobs. Ask, and Darcy will recommend what suits the site and the look.

  7. Yes. Iron Arc Fabrication carries full public liability insurance. Documentation is available on request.

  8. Definitely. Darcy is happy to work from your drawings, plans or a photo, or to draw it up with you as part of the quote.

Section FOrder slip · free written quote

Commission a piece.

Fill in the slip or ring the workshop. Every quote is free, written and itemised, with no obligation to go ahead.

Order slipIron Arc Fabrication
How to reach you (phone or email)

Your name and one way to reach you are required.